Description

HP**6 Heat Pipe Solar Collectors HP**6 collector uses the TB-I tube as the absorber tube, each glass tube is fitted with an aluminum contact fin which serves to be the heat transfer contact and also fixes the copper pipe against inner wall of the glass tube. The liquid in the heat pipe change into vapor by heating, the vapour goes up within the heat pipe. When heat is exchanging between the condenser end of the heat pipe and the metallic faster of the heat pipe and main pipe in the collector head, herein, the heat will be transferred into the liquid (anti-freezing liquid or water inside the main pipe). As long as the sun shines, the circulation will repeated. HP**6 collector header comprises one main copper pipe, which has been welded with *6 cavities in which the heat transfer liquid contact with the condenser of the heat pipe. The header is insulated with polyurethane foam and encased with an UV stabilized galvanized steel sheet. HP**6 collector is mostly suitable to be used in split-up systems; the collector can be fixed on a flat roof, tile roof, or corrugated iron sloped roof. Features - Utilization all year round even in cold climates; - Can operate with water pressure up to 0.6MPa; - Less pressure drop; - Less volume of heat transfer liquid required. - The collector will still operate in the event of occasional tube breakages; - Modular system means easy handling, installation and can be extended to cover larger areas; 7 panels can be connected in series. - Easy to install on roofs, balconies or fa?ades; - Can be combined with existing energy source; for more information please visit our page www dot cibsolar dot com. or send us email to info at cibsolar dot com.